Main assembly
- Furnace, stand, airflow cone and draft screen
- Specimen holder, manual guide and viewing mirror
- Two furnace thermocouples and measurement electronics
- Touchscreen console and PC reporting configuration
PROWHITE · PW-NCT-01
REACTION TO FIRENon-Combustibility Test Apparatus
A heated tube-furnace arrangement designed to evaluate temperature rise, mass loss and sustained flaming.
Method reference: EN ISO 1182:2020
750°CNominal furnace temperatureΔT · Δm · t_fReported quantities7″Touchscreen PLC/HMI
FROM SPECIMEN TO RESULT
Test sequence
Sequence outlined in the brochure for EN ISO 1182:2020.
- Prepare & weigh
Condition the specimen and record its initial mass using an external balance.
- Heat & stabilise
Bring the furnace to approximately 750°C and verify temperature stability.
- Expose & record
Lower the specimen into the furnace; record both furnace temperatures and flaming time.
- Cool & evaluate
Weigh the cooled residue; determine temperature rise, mass loss and sustained flaming.
TECHNICAL SPECIFICATIONS
Technical data
| Model | PW-NCT-01 |
|---|---|
| Method reference | EN ISO 1182:2020 — non-combustibility test |
| Nominal furnace temperature | 750°C |
| Nominal specimen size | Ø45 × 50 mm; preparation according to the test method |
| Temperature measurement | Two furnace thermocouples; optional specimen channels |
| Reported quantities | Temperature rise ΔT, mass loss Δm and flaming duration t_f |
| Operator interface | 7-inch touchscreen PLC/HMI with separate control console |
| Data handling | PC-based temperature recording, result evaluation and reporting |
| Mechanical arrangement | Tube furnace, manual specimen lift, stabilising cone and draft screen |
| Protective functions | Independent overtemperature cutout and emergency stop |
Mass loss is determined by weighing before and after exposure. Sustained flaming is observed and timed by the operator.
Configuration & supporting equipment
Accessories & services
- Furnace profile verification and calibration tools
- External balance, conditioning oven and desiccator
- Spare specimen holders, thermocouples and heater
- Installation, operator training and verification services
Accessories and services are specified in the quotation.
MATERIAL DEVELOPMENT & QUALITY CONTROL
Applications
R&D and internal quality control of mineral and fiberglass-based products, including membrane formulations with binders, treatments and pigments.
REQUEST & TECHNICAL SUPPORT
Tell us your material, test method and required configuration.
Your information is prepared as a structured message. You can send it by email or continue directly on WhatsApp.